- Glass Containers
- Plastic Containers
- Caps & Closures
- Support & Resources
Caps and Closures
- Plastic Continuous Thread (CT) Closures
- Plastic Child Resistant Caps
- Plastic Dispensing Closures
- Plastic Pail Lids
- Plastic Pumps and Sprayers
- Metal Closures
- Tamper Evident Closures
- Miscellaneous Closures & Accessories
Glass Bottles, Jars, and Jugs
Plastic Bottles, Jars, Jugs, and Pails
Caps, Closures, Pumps, and Sprayers
- Metal Screw Caps
- Plastic Screw Caps
- Plastic Temper Evident Caps
- Plastic Flip Top Dispensing Caps
- Plastic Disc Top Dispensing Caps
- Plastic Liquid Dispensing Spout Caps
- Plastic Spout Dispensing Caps
- Plastic Orifice Reducer Plugs
- Plastic Jar Seals
- Plastic Fine Mist Sprayers
- Plastic Lotion Pumps
- Dropper Assemblies and Pipette
- Spice Flapper Caps
- Plastic Pail And Drum Lids
Browse By Product Use
What Some of Our Customers Say
Did you have an experience you want to share with us? click here to leave a review.
From Our Blog
Packaging Crash Course
Quick Question Monday
Quick Question Monday : Fluorination, Answer To My Panelling Bottle Problem?
Paneling occurs when the pressure inside a plastic bottle becomes less than the air pressure outside of the bottle. When this happens the walls of the plastic bottle begin to collapse inward. So how do we stop this from happening?
Quick Question Monday – What Is A Plastisol Liner?
One of the most important factors in cap selection is choosing the perfect liner type and style. The main purpose of the liner is to create a seal between the bottle land area and the cap itself, preventing leakage. Click here to learn more.
Quick Question Monday : What's The Difference Between Tin-Plate Steel and Aluminum Metal Cap?
Metal screw cap is a common closure choice in the cosmetic, beverage, and nutraceutical industries due to their attractive high-end look. When you are choosing the perfect metal screw cap for your product, there are two main material choices.
Quick Question Monday: What Goes on a Food Label?
The Necessary Requirements To be appropriate for FDA standards, food must be properly labeled on the shelves of the food store. Proper labeling is required for most prepared food, while foods such as raw fruits and vegetables do not require labeling. Find out what goes on a food label here.
Quick Question Monday: Should I Put Essential Oils in Glass or Plastic Bottles?
First, what is essential oil? An Essential oil is a liquid that is distilled (through steam or water) from leaves, stems, flowers, bark, roots, or other elements of a plant. Essential Oils are a natural way to infuse your product with aromatic and medicinal properties. So what should essential oils be stored in? Find out here.
Quick Question Monday: What is a Bulk Module Pallet?
A Bulk Module Pallet is a packing method, where truckloads of glass are shipped using less packing materials to maximize the quantity of glass being hauled. While stacking cartons in layers on a pallet is a common way to ship glass, this alternate method has become a popular way to transport pallets.
Quick Question Monday: What is the Pantone Color System and How is it used in Packaging?
The Pantone Color System, or PMS, is a standardized color matching system, which is widely used around the world. It was devised to help printers and designers to specify and control colors for printing projects. The Pantone Color System allows you to specify colors that cannot be mixed in traditional CMYK.
Quick Question Monday : What is Thread and Knurled Edge on a Metal Screw Cap?
What is a continuous threaded metal closure? A continuous threaded closure consists of a single continuous threading system that allows metal caps to be screw on to all different types of bottle and jars. Moreover, what this thread and knurled edge mean on a metal screw cap? Find out here.
Quick Question Monday : What is the Difference Between a Horizontal and Vertical Dropper?
What is a Horizontal or Vertical Dropper? A dropper is an insert for your bottle closure dispensing system, commonly used with small dose items such as essential oils, homeopathic remedies, herbal extracts, and chemical applications. Click to find out the difference between two basic types of droppers.
Quick Question Monday : Top Gate? Side Gate? Inside Gate? What are You Talking About?
When manufacturing plastic caps and closures, Top gate, side gate, and inside gate all reference the location where the molten plastic material flows into the injection mold cavity, commonly known as the cavity entrance.
Quick Question Monday – How do you select the correct dropper tip?
When selecting a dropper tip for plastic dropper bottle applications, you have two main choices – Extended Dropper Tips and Extended Controlled Dropper Tips. While the two names looks similar, there are scenarios where one is preferred over the other, but how do you determine which is suitable for your application?
Quick Question Monday : Why Do Production Lead Times Change?
When you are ordering production stock or special order packaging components, we always state the “manufacturer’s suggested lead time”. While it may seem straightforward on the surface, it is actually a very tricky topic.
Quick Question Monday : What is a Deco Template?
The deco template, sometimes referred to as a “die line” or “live area” by some designers, communicates the dimensions of that surface area.
Innovative and stylish ways to add tamper evident indicators to your existing package
Tamper-evident packaging has long been seen as a requirement for most food, beverage, pharmaceutical, nutriceutical, and cosmetic items for consumer confidence. There are a wide array of existing tamper evident technologies in the packaging industry that you can take advantage of.
Quick Question Monday : How are Pallets Sized and Constructed?
A pallet, sometimes inaccurately called a skid (a skid has no bottom deck boards), is a flat transport structure that supports goods in a stable fashion while being lifted by a forklift or pallet jack.
Quick Question Monday : What is Price Per M in Price Quotes?
You might have received price quotes from different industries where price is expressed in $/M, and you may be wondering, what’s M? What’s the unit of measure here? Why it is done this way? And why do they use the uppercase letter M? What is M and what does it mean?
Quick Question Monday : How to reduce the chance of glass breaking during transit?
Shipping glass bottles or jars via parcel carrier has always been a challenge, as the carton materials used are meant for bulk pallet handling, where cartons are tightly packed together on a pallet and remain on the pallet during handling, instead of single-piece shipments.
Quick Question Monday : Hot Filling Beverages And Juices in PET?
Hot filling is a process of choice for many juices and beverages because it eliminates the need of preservatives and chemicals while maintaining the same level of shelf life and nutritional properties of the beverage.
Quick Question Monday : How To Make Sure Your Cap Is Screwed On Tight Enough?
When it comes to screwing on a continuous thread (CT) cap of any kind, application and removal torque should be properly measured to ensure a proper engagement of a threaded closure to a bottle or jar.
Quick Question Monday : Is My Glass Bottle And Plastic Bottle Food-Grade Safe?
Are you looking for the perfect bottle or jar for your food or beverage product? You may have heard about food-grade safe bottles and jars, but how can you be sure the glass bottle or plastic jar you have selected is food-grade safe? Time for some answers.
Quick Question Monday: How Are Sprayers and Pumps Output Measured?
Pumps and sprayers commonly have a unit of measure specification – referred to as “output” , which is commonly measured in mcl, ml, or cc. Output determine how much fluid is dispensed each time the pump or sprayer is actuated.
Video : What is Plastisol Liner in a metal screw cap?
Plastisol liner is a ring like gasket type liner that is "baked" to the interior of the metal screw cap. It provides an air tight seal for hot fill applications. Find out more about plastisol liner here, when you need to use it, and how plastisol liners are made from the prospective of a metal cap manufacturer.
Video : Closures 101
Common container and closure dimension specifications were established to ensure a perfect fit and successful packaging. Learn about them here. Video Transcription Available.
Video : How to Measure a Bottle Neck or Cap
The neck of a bottle has many critical and exacting dimensions. And there are many sizes and countless styles of caps to choose from. The secret to a great fit?.
Video : Bottles 101 – The Anatomy of The Bottle
Neck. Foot. Heel. Foundation. They’re a few of the many interesting parts of a bottle that are explained in the Bottle Parts 101: Anatomy Of A Bottle video from O.Berk. In less than three minutes (literally!), you’ll see every critical part of a bottle.